Other Accessories

Reisemobil

Offroad

Boot

Blaulicht

Fig.
Art.-No.  
1 2000 Individual Sensor (for e. g. Tank Sensor FL, the former Tank Transmitter Set)
Tank sensor, consisting of rubber dowel, screw V2A with washer and cable lug
2 2001 Temperature Sensor 825
Temperature sensor with connection cable of 3 m length, sealed for protection against environmental pollution, for all VOTRONIC units. Bore hole for bolt M8

Temperature Sensor 625
As before, but suitable for bolt M6
3 2085 Inside Temperature Sensor
Inside temperature sensor with connection cable of 3 m length with transparent cap for installation in the vehicle. (Mounting hole 7.5 mm) Suitable for VOTRONIC VPC Series and LCD-Thermometer/Clock S
4 2005




2008
Extension Control Cable
Plug-and-go extension cable of 5 m length for VOTRONIC units, such as: Battery Computer, Ammeter, Solar Display, Remote Controls for Automatic Charger and MobilPOWER Inverter etc. - Control cable 6-pin with connector

Control Cable
Cable 6-pin as mentioned above but without connector
5 2019 Blind S for Front Panel 85 x 47 mm
Blind cover for planned panels or for installation of own components.
Dimensions: 85 x 47 mm, cutout max. 70 x 35 mm
6 2016 Mounting Frame S for Display Part Inverter
For external mounting of the control panel of the VOTRONIC Inverter MobilPOWER.
Appearance and mechanics (identical height 85 mm) are adapted to the VOTRONIC modular system.

7 2024 Casing for LCD Displays
Plastic casing, silver lacquered, for former LCD display units with silver front panels
Dimensions 84 x 79 x 25 mm
8 2152 Residual current operated Circuit-Breaker RCBO 16-30
The FI/LS combination switch integrate people, fire-, and cable protection in one module for the 230 V circuit of the vehicle. The unit features a 2-pole automatic circuit-breaker and a 2-pole current-fault circuit breaker in an industrial casing with transparent door, terminal for protective conductor and equipotential bonding as well as space for a further 2-pole fault current breaker or 2 safety automatic circuit-breaker. 230 V/16 A, release current 30 mA, TÜV (MOT) / GS-certified. Dimensions 110 x 180 x 95 mm Operating Manual
9 2151 Residual current operated Circuit-Breaker RCBO 16-30 Mini
Performs like 2152, however, does not have room for an additional circuit breaker, Dimensions 100 x 140 x 100 mm
10 2200 Cutoff Relay 12 V / 70 A
Disconnects the starter battery from the board battery, as soon as the motor is stopped, and reconnects both batteries in parallel when the motor is restarted for charging by the dynamo. Including female connectors and manual. Dimensions incl. mounting flange, without connections 26 x 26 x 42 mm.
Not suitable for vehicles according to Euro 6 standard
11 2202 Switch Relay 12 V / 60 A
Back Contact Relay (bottom contact) for installation of a Battery Charger VBCS Triple at an existing Schaudt "Elektroblock (EBL)" - Including female connectors 9.5 mm and 6.3 mm and
Dimensions: 33 x 29 x 41 mm incl. mounting flange, without connections
12 2201 High-Capacity Cut-off Relay 12 V / 200 A
Disconnects the starter battery from the board battery, as soon as the motor is stopped, and reconnects both batteries in parallel when the motor is restarted for charging by the dynamo. Powerful execution equipped with spark extinction diode. Power Supply Connections: Threaded bolts M6; control connections: Flat connector 6.3 mm. Dimensions: 45 x 45 x 63 mm incl. mounting flange, without connections. Including female connectors 
13 2216 Power Fuse Holder 5-fold with Housing for protection of large and bolt-down fuses Fully insulated fuse holder for power fuse for protection of large consumers loads or power circuits. The fuse holder can be added, and both sides are equipped with a threaded bolt M8. Delivery excluding powerfuse (fig. 15, 17).
14 2218 Power Fuse Holder with Lid for bolt-down fuses
Fully insulated fuse holder for power fuse for protection of large consumers loads or power circuits. The fuse holder can be added, and both sides are equipped with a threaded bolt M8. Delivery excluding Boltdown fuses (fig. 15).
15 see
Table
Bolt-Down Fuses
to be inserted in power fuse holder No. 2218 and 2216. For 12 V and 24 V installation, bore holes M5, with inspection window and colour coding. Power Strengths and Order No. see table below
30A 40A 50A 60A 70A 80A 100A 125A 150A 175A 200A
2219 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230
16 2251 Power Fuse Holder with Lid
Completely isolated fuse holder for power fuse for protection of large consumers or power circuits.
Both sides of the fuse holder are equipped with a thread M8.
Delivery excluding power fuse (fig. 13).
17 see
Table
Power Fuse
Power fuse for insertion into power fuse holder for protection of 12 V and 24 V installations. Power Strengths and Order No. see table below
100A 125A 150A 175A 200A 225A 250A
2253 2254 2255 2256 2257 2258 2259
18 2242 Fuse Holder for Strip Fuses
Fuse holder for strip fuse for protection of larger consumers. Both sides of the fuse holder are equipped with a thread M5. Delivery excluding fuse.
19 see
Table
Strip Fuse, packaging quantity 3 pieces
Strip fuse for insertion into fuse holder (fig. 18), as well as for Plus Distributor 8
for protection of 12 V and 24 V installations. Power Strengths and Order No. see table below
30A 40A 50A 60A 80A
2243 2244 2245 2246 2247
20 2213 Cable fuse holder IP 56 for automotive flat fuses
Fully insulated fuse holder (IP 56) for automotive flat fuses. Strand 2.5 mm², red, length of both sides approx. 235 mm. Delivery excluding fuse
21 2208 Battery pole terminals with distributor for positive pole
Battery pole terminals for positive pole with 3 connecting bolts M6-M8-M6, including nuts and spring washers. Material brass hinge tin-coated.
  2209 Battery pole terminals with distributor for negative pole
As before, but suitable for negative pole
- 2262
2263
High-Current Cable 25 mm², Length: 40 cm
High-Current Cable 35 mm²
, Length: 40 cm
High-current cable, orange, highly flexible, both sides are equipped with cable lugs for bolts M8, for connection of power fuse holder and battery. Other lengths can be manufactured on request.
22 2268
2269
2272
2273
Connection Cable for SMI Inverter Red/Black 25 mm², Length: 1 m
Connection Cable for SMI Inverter Red/Black 35 mm², Length: 1 m
Connection Cable for SMI Inverter Red/Black 25 mm², Length: 2 m
Connection Cable for SMI Inverter Red/Black 35 mm², Length: 2 m
Cable sets for plus (red) and minus (black) battery connection of the SMI Inverters “ST”,
highly flexible high-current cables, ready-made, including pipe cable lug for bolt M8,
Art.-No. 2268 & 2272: 25 mm² for SMI 1200 ST(-NVS)
Art.-No. 2269 & 2273: 35 mm² for SMI 1700 ST(-NVS)
23 2065 Control Unit
On/off control unit for VOTRONIC Sine Inverter SMI (-NVS) of all capacity classes. The control is effected by a +12 V signal (ON), e. g. of D+ (inverter works automatically during motor operation for light pole, air-conditioner, refrigerating and heat boxes, large consumers etc.) or centrally from a general main switch (all units including the power packs are switched-on/off when entering or leaving the vehicle).
Delivery Scope: Control Unit, Connection Cable 30 cm length, Operating Manual
24 2067 Additional Remote Control for Sine Inverter
Extension set with 2nd remote control for VOTRONIC Sine Inverter SMI (-NVS) of all capacity classes. In addition to the remote control, which is included in the standard delivery of the inverter, it allows complete control and further operation of the inverter from a second location (right / left, driver’s cabin / body).
Delivery Scope: Remote Control, Y distributor, connection cable 5 m, connection cable 30 cm length
25 2007 Cable Set for Connection Solar Charging Controller at EBL
Readily assembled Cable Set for the connection of a VOTRONIC Solar Charging Controller at the suitable output of an existing Schaudt "Elektroblock (EBL)" with connected Controll and Display Panel (DT.../LT...).
Please check in advance the compatibility of your Schaudt Electrobloc (EBL) and the corresponding control panel, because we are not able to give any warrenty for this.
Delivery Scope: Cable Set 1 m length, Operating Manual
26 2023 Cover for Smart Shunt
Plastic cover for Smart-Shunt 100, 200 and 400
for LCD-Batterie Computer S or VPC Jupiter.



1
Einzelsensor 2000   


2
Temp Sensor 2001  




3
Innen Temp Sensor 2085  



4
Steuerleitung 2005

 


5
Frontplatten-Blende S 2019  


6
Montagerahmen S Inverter 2016  


7
  Aufbau Gehaeuse Kunststoff 2024  



8

RCBO 2152
 


9
RCBO 2151  



 10
 
Trenn Relais 12V 70A 2200
Umschaltrelais 2202


11



12
Trenn-Relais 12V-200A 2201
 




13

Hochlast Sicherungshalter 2216
 




14
Hochlast Sicherungshalter 2218  


15
Kfz Schraubsicherung 22xx  



16
Hochlastsicherungshalter m Deckel 2251  

17
Hochlastsicherung 250A  



18
  Sicherungshalter 50A 2242  
19   Streifensicherung  



20
 
Kabel Sicherungshalter 2213

 


21
Batterie Polklemme  



22
Hochstromkabelsatz 2269 rot schwarz  

 



23
 Control Unit 2065   



24
Bedienteil Sinus Inverter 2067    


25

EBL Kabelsatz 2007




26
Smart Shunt Abdeckung  
EMHC CIVD
Go to top