Accessories for Automatic Chargers

Suitable for Series Pb and VAC 12V and 24V

 Reisemobil  Offroad Blaulicht 

Boot 

Fernbedienung S

Remote Control S für Automatic Chargers  (Article-No. 2075)

Suitable for automatic charges of series Pb and VAC. If the unit has been installed at a difficultly accessible
location, unit status and charging progress are indicated by the pilot lamps (LED). One of the corresponding
main functions of the unit can be remote-controlled by means of the switch, such as SilentRun (night
operation) of the chargers of series Pb and VAC, standby of the chargers of series VAC-F-, VAC-F II- and
VAC Station for intervention vehicles. The remote control is executed as panel version. Appearance and
mechanics (identical height 85 mm) are adapted to the other displays of the VOTRONIC modular system.

Dimensions: (W x H x D): 47 x 85 x 16 mm
Delivery Scope: Connection cable of 5 m length, plug-in type on both sides for unit connection,
fastening screws, drilling jig, Operating Manual

Remote Control S für Automatic Chargers  (Article-No. 12075)

Description like mentioned above - but with humidity-proof Electronic-System for Boats

Fernanzeige S Duo 2078

Remote Control S only for Automatic Charger Duo  (Article-No. 2078)

For control of the 2 separate battery circuits of the chargers VAC-Duo. The pilot lamps (LED) are indicating
the corresponding charging progress. The remote control is executed as panel version. Appearance and
mechanics (identical height 85 mm) are adapted to the other displays of the VOTRONIC modular system.

Dimensions: (W x H x D): 47 x 85 x 16 mm
Delivery Scope: Connection cable of 5 m length, plug-in type on both sides for unit connection,
fastening screws, drilling jig, Operating Manual

Remote Control S only for Automatic Charger Duo  (Article-No. 12078)

Description like mentioned above - but with humidity-proof Electronic-System for Boats

Batterie-Status-Anzeige 2082

Charger State Monitor IP67  (Article-No. 2082)

Suitable for all automatic charges of series Pb and VAC. The tri-color light-emitting diode indicates the
readiness for operation of the charger and the power/electricity supply and shows the charging level of
the batteries. The remote indicator can be installed at any location by means of a bore hole, 18 mm.It can
be installed at a well visible location in the inside area (for instance in the dash board), as well as outside,
such as near the driver’s door. Direct connection to the chargers of series Pb-, VAC-, VAC-F-, VAC-F II-,
VAC-Duo and VAC-Station is possible by means of the connection adapter and the plug-in connection
cable of 5 m length. The Charger State Monitor IP67 is incompatible to the Firecan chargers series VAC-Fc.

Delivery Scope: Indicator with connection strands red/black of 2 m length, Label for indentification,
Elektronic Unit, connection cable of 5 m length, plug-in type on both sides for unit
connection, Operating Manual
Betriebs Fernanzeige IP67 2081

Remote Indicator IP67  (Article-No. 2081)

Suitable for all automatic charges of series Pb and VAC. The green light-emitting diode indicates the
readiness for operation of the charger and the power/electricity supply. The remote indicator can be
installed at any location by means of a bore hole, 8 mm. It can be installed at a well visible location in
the inside area (for instance in the dash board), as well as outside, such as near the driver’s door. The
supplied packing washer allows front installation with high tightness IP67. Direct connection to the
chargers of series Pb-, VAC-, VAC-F-, VAC-F II-, VAC-Duo and VAC-Station is possible by means of the
connection adapter and the plug-in connection cable of 5 m length.

Delivery Scope: Connection strands red/black of 0.4 m length, connection adapter, connection
cable of 5 m length, plug-in type on both sides for unit connection, packing washer,
coupling ring, Operating Manual
Temp Sensor 2001

Temperature Sensor 825  (Article-No. 2001)

Battery temperature sensor with connection cable of 3 m length and mounting hole M8. It is sealed
for protection against environmental pollution. Suitable for all VOTRONIC Automatic Chargers of the
series Pb and VAC, charging converters VCC, as well as solar controllers of the series SR and MPP.

Temperature Sensor 625  (Article-No. 2088)

Article like mentioned above but with mounting hole M6.

EMHC CIVD
Go to top