Automatic Charger VAC 1215 Station

With Helix Cable 5m- Article-No. 0528

The charger series VAC-Station is suitable for application in vehicle halls and complies with all regulations of the FNFW of the valid fire brigade standard DIN 14679 for external charging and following trickle charging of starter and auxiliary batteries in fire fighting vehicles with the exception of the protection against splash water IP21.

Feuerwehr

VAC 1210 Station mit 5m Spiralkabel


Charging Programs:

5  6  7  8  9  10

Technical Features:

BR  FB  Tropfen


Charging Options:

Batterien 1

Vehicle Battery + Auxiliary Consumers

Description

  • Charging programs No. 5, 6, 7, 8, 9 and 10 adjustable for all battery types
  • Automatic, quick and at the same time gentle full charging and trickle charging of the vehicle battery according to DIN 14679
  • Trouble-free operation and simultaneous supply of the units being connected to the vehicle's board mains supply (such as charging trays)
  • Automatic separation from mains of the charging connector in case of missing battery (to prevent short-circuit and corrosion of connector)
  • Optical and acoustical warning in case of battery failures and connection errors
  • Outstanding charging technology
  • All-automatic continuous operation for permanent readiness for use of the vehicle
  • Compensation of the voltage loss on the charging cables ensuring exact observation of the charging voltage rates
  • Variable fitting position due to additional unit label (included in the standard delivery)
  • The electronic system is protected against humidity
  • The charging voltage is exempt from peaks, and it is controlled in such a way, that overcharging is excluded
  • Battery regeneration in case of extended stop periods twice a week
  • Prepared for direct connection of the charging plug at the cable end
    (such as charging connector 12V/24V, Art.-No. 2331, or C-connector, Art.-No. 2323)
  • Cable length approx. 1.2 m, extractible to approx. 5 m
  • Oil-proofed and acid-proofed cable for high mechanic stress, suitable for humid rooms

Technical Details

 Charging Capacity in [V]/[A] 12 / 15
 Nominal Operating Voltage (AC) in [V] 230
 Operating Voltage Range (AC) in [V] 190 - 265 (Full Charging Capacity)
 Power Consumption (AC) in max. [W] 180
 Sinusoidal Power Factor Correction (CosPhi = 1) yes
 Nominal Battery voltage (DC) in [V] 12
 Battery Capacity in [Ah] 40 - 160
 Charging Current in [A] 15
 Auxilary Charging Port "S" in [A] -
 Characteristic Line of Charging IU1oU2
 Voltage limitation during all charging modes and programs [V] 15
 Ripple Factor Voltage in [mV] rms < 40
 Number of Charging Ports 1
 Mounting Position of Unit any
 Temperature Range [°C] -20 to +45
 Protection Class/System of Protection I / IP 21
 Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges, without connections
210 x 71 x 160
 Weight in [g] 1250
 Mark of conformity (CE) EN 60335-2-29
 Ambient Conditions, Humidity of Air:  max. 95 % RH, No Condensation
 Lieferumfang: Mains supply cable, Helix cable, Operating Manual

Charging Programs

5 MOTOR“: Charging Program for Lead, Acid/Lead-Acid Batteries, Characteristic Line IU1oU2
Characteristic line similar to dynamo/generator for mobile application (acid accumulation) with particularly low maintenance (battery gassing, water consumption). Charging and conservation of charge of starter batteries in intervention vehicles, according to a customary suggestion of the Standard Committee Fire Protection (FNFW). For conventional, standard starter batteries, starter batteries being "absolutely maintenance-free", "maintenance-free according to EN", "maintenance-free according to DIN", "maintenance-free", "lowmaintenance".

6 „L“: Closed Acid/Lead-Acid Batteries with Water Consumption
L = low according to DIN EN 50342-1, characteristic line IUoU2

Characteristic line with average level U1 for acid batteries for chargers being installed in the vehicle or external chargers at a permanent location.

7 „VL“: Closed Acid/Lead-Acid Batteries with Water Consumption
VL = very low according to DIN EN 50342-1, characteristic line IU1oU2

Characteristic line with high level U1 for acid batteries for chargers being installed in the vehicle or external chargers at a permanent location.

8 „Fleece“: Closed Batteries (VRLA) with AGM/Fleece Technology,
Characteristic Line IU1oU2
Characteristic line for AGM batteries for chargers being installed in the vehicle or external chargers at a permanent location.

9 Gel“: Closed Batteries (VRLA) with Gel Technology,
Characteristic Line IU1oU2
Characteristic line for gel batteries for chargers being installed in the vehicle or external chargers at a permanent location.

10 „External“: Without allocation of the battery type,
Characteristic Line IU1oU2
Charging of the vehicle's battery by external charger over vehicle plug in vehicle halls with allocated or free parking lots. Universal program for charging and conservation of charge of acid/gel/AGM batteries.

Technical Features

BR Automatic battery regeneration   FB Connection remote control / remote indicator
Tropfen Electronic system humidity-proof  
 
 

Downloads

Anleitung Katalog

Accessories

Fernbedienung S

 

Betriebs Fernanzeige IP67

 

Batterie-Status-Anzeige 2082

Remote Control S (Art. 2075)

Remote Indicator IP67 (Art. 2081)

Charger State Monitor IP67 (Art. 2082)

    C-Ladestecker  

Ladestecker

 

C-connector (Art. 2323)

Charging connector (Art. 2331)

EMHC CIVD
Go to top